Diamastripper - Toothed DST001
â€‹Pls note: Information below contains information on booth units.
The DIAMASTRIPPER Revolution is here!
Seven Tools in One!
Same Tool for Left & Right handed!
Proper hair growth is extremely important in maintain the coat on a rough coated dog. If the hair is not pulled correctly the results will not be optimal. Most conventional stripping tools have a 'V' tooth design. Hair will gather at the base of the V tooth and will 'cut or break off' resulting in "Breaking the Coat". The DiamaStripper was designed with a square tooth and square gusset style tooth. The result was NO coat breakage or cutting. The DiamaStripper with no teeth does not break or cut coat. The diamond electroplating on the DiamaStrippers prevents slippage of hair. This, along with the ergonomic handle, allows the person hand-stripping to not over grip while using the DiamaStrippers which helps eliminate arm/hand fatigue.
The DiamaStripper was created, patented, assembled, and MADE in the USA! The entire tool was made in Michigan. By keeping the manufacturing process in the USA we were able to maintain the overall quality of each and every tool.
The handle was ergonomically precision molded using a high grade urethane base. This urethane is designed to withstand excessive use and abuse. The rubberized grip gives the operator an incredible feeling of comfort and control. One tool...right AND left handed use.
Conventional strippers only do one procedure...strip coat with hair breakage/cutting...AND you are limited to right or left hand which means a separate tool must be purchased...one for right hand and one for left hand.
The DiamaStripper does the work of 7 tools....one tool...right AND left handed...NO COAT BREAKAGE/CUTTING
Two differing ends available.
- One with square gusseted teeth for undercoat/blending/finishing.
- The other end with no teeth for topcoat/take downs.
NO coat breakage with either end.
Two opposing sloped ends.
- One for large areas.
- The other for smaller detailed areas such as faces and ears. Also great for plucking individual hairs on entire body.
The metal assembly of the DiamaStripper was meticulously milled within .002" to maintain weight, tapers, and radius'. No other stripping tool on the market has this perfection. The metal material was chosen to provide the best characteristics for the application.
The ends of the DiamaStripper have authentic electroplated diamond applied..(yes..just like the diamond on your finger). This unique diamond was chosen by diamond professionals who thoroughly understand the characteristics of diamond. The electroplating was completed using a special process developed to give the tool its excessive 'GRIP' and durability.
If you are concerned about weight...be concerned no more! The DiamaStripper weighs an amazing 3 ounces! A tremendous amount of machining was done to alleviate as much weight as possible. Hand stripping for hours will be no problem.
Many stripping tools on the market have sharp corners and edges which can dig holes in the coat and skin especially in thin/sensitive areas. In some cases resulting in medical attention. The DiamaStripper has radius (rounded) corners and edges on all stripping surfaces which will eliminate the concern of damage to the animal.
The DiamaStripper is specifically designed to prevent and alleviate potential hand/arm issues associated with conventional hand-stripping procedures